You are currently viewing Learn How To Make Glitter Wine Glasses With Your Cricut

Learn How To Make Glitter Wine Glasses With Your Cricut

Are you a wine drinker or know someone who is? I have seen glitter wine glasses with vinyl sayings on them over the last couple of years, and I’ve always wanted to try my hand at making them. So, I got out my glitter, my Cricut Joy, some wine glasses and some vinyl and got busy. I want to help you learn how to make these glitter wine glasses with your Cricut.

Materials I Used For This Project

This post contains some affiliate links for your convenience (which means if you make a purchase after clicking a link I will earn a small commission but it won’t cost you a penny more)!  As an Amazon Associate I earn from qualifying purchases. Read my full disclosure policy.

  • Permanent Vinyl
  • Transfer Tape

Making The Glitter Wine Glasses

Here is a link to the instructional video.


DIY Glitter Wine Glasses

Start out by taping two rolls of Electrical Tape together to get the right height to mark the wine glass. Tape a dry erase marker to the top of of the electrical tape rolls.

Use the dry erase marker to draw a circle around the glass by twirling the glass in a circle with the marker touching the glass.

Then you are going to put a piece of electrical tape around the glass right above the line you’ve drawn.

Use your finger to go around the glass to erase the line you drew. It will come right off.

Using a sponge brush to cover the bottom portion of the glass, below the tape, with the Diswhaser Safe Mod Podge. Next you will cover the Diswhaser Safe Mod Podge with a layer of fine Glitter.

Let dry at least four to six hours and repeat two more times, covering the glitter with another coat of Diswhaser Safe Mod Podge and fine Glitter. Be sure to brush off the excess glitter, with the third sponge brush, before adding the additional layers of Diswhaser Safe Mod Podge and fine Glitter.

I used the two small plastic cups to poor some of the Diswhaser Safe Mod Podge into for each wine glass so I didn’t contaminate the original bottle of Diswhaser Safe Mod Podge with either color of Glitter.

Next, add a top coat of the Diswhaser Safe Mod Podge over the glitter to seal it. Let that dry overnight.

The Final Steps

Cut out your design on your Cricut. Weed the design with the Pin Pen. Place a piece of Transfer Tape on top of your weeded design and burnish well to transfer the design to the Transfer Tape.

Before adding your design to the wine glass, remove the electrical tape and wipe the glass down with an alcohol wipe to remove and finger prints, excess glitter or debris. Transfer your design to the wine glass, burnish and remove the Transfer Tape.

The Finished Product

See links above to purchase this design.
I got this design by doing a Google search for Christmas SVG’s.

And there you have it! You have now learned how To make glitter wine glasses with your Cricut.

Until next time.

Kathy

P.S. You might also like these makeup bags https://kpeckscreativecafe.com/makeup-bags-withhtv-heat-transfer-vinyl/

Makeup Bags With HTV (Heat Transfer Vinyl)

Check out this gorgeous new Sweet Summertime SVG Bundle from Dreaming Tree.

This Post Has 2 Comments

  1. Shea

    Hey Kathy, love this project! The electrical tape trick for getting accurate lines drawn is genius!

    1. krp@kpeckscreativecafe.com

      Hi Shea, Thank you!!! These are so much fun to make. You should definitely make some for the holidays, or just because.

Leave a Reply